See a price range for a fence in Grants. FindMyFencer installs with its own crews in Southern California and the Denver / Front Range area.
Get My Free EstimateAs a close-knit community in New Mexico of roughly 9,239 residents, Grants sees steady demand for residential fencing — from backyard privacy and pet enclosures to curb-appeal upgrades and pool-safety fences.
Local fences here have to stand up to intense year-round sun, extreme heat, and monsoon-season wind. Powder-coated aluminum and quality vinyl resist warping and fading far better than untreated wood in this climate. Material and post depth depend on the yard. The range on this page is a starting point, not a locked price.
Typical installed cost per linear foot in Grants, NM
$13 – $110 /ft
Installed price per linear foot across common fence materials — about 8% below the national average for New Mexico. Your total depends on fence length, material, and site conditions.
Grants is located in Cibola County, New Mexico. The map covers 2 residential ZIP codes in Grants, from central neighborhoods to newer developments on the edge of town.
Building permits and fence regulations for Grants addresses are typically handled by the city's building department, with unincorporated areas nearby falling under Cibola County jurisdiction. Check that office for the rules on your street.
County
Cibola County
Determines your permit office and local fence codes.
ZIP Codes Served (2)
Grants and nearby communities in Cibola County.
Real installed-price ranges by material, adjusted for New Mexico labor and material costs. Typical project assumes 150 linear feet of fencing.
| Material | Installed Cost | Lifespan | Upkeep | Typical 150-ft Project |
|---|---|---|---|---|
Cedar / WoodMost Popular Classic privacy pick | $23 – $55 /ft | 15–20 yrs | Stain or seal every 2–3 yrs | ~$5,396 |
Vinyl Low maintenance, long lifespan | $32 – $64 /ft | 20–30 yrs | Occasional rinse — no painting | ~$6,293 |
Chain Link Budget-friendly & durable | $9 – $37 /ft | 20+ yrs | Virtually none | ~$3,257 |
Aluminum Elegant, pool-code friendly | $28 – $55 /ft | 30+ yrs | Virtually none — won't rust | ~$6,624 |
Project totals assume 150 linear feet installed.
Gates, terrain, old-fence removal, and height upgrades affect your final number — draw your fence on a map for a price in under 2 minutes.
See how New Mexico compares nationally in our New Mexico Fence Cost Report, part of the National Fence Cost Report.
Draw your fence to see a price range in minutes. FindMyFencer installs with its own crews in Southern California and the Denver / Front Range area.
New Mexico's intense high-desert UV, heat, monsoon wind, and dust fade lower-grade materials fast; powder-coated aluminum, masonry, and UV-stabilized vinyl outlast untreated wood.
New Mexico cities commonly require a permit for fences and walls over 6 feet, with lower front-yard limits and corner sight rules. Rules vary by city and county, so confirm height limits, setbacks, and whether a permit is required with your local building department before you start.
HOAs are common in newer Albuquerque- and Santa Fe-area developments, often regulating wall style, color, and height.
From first estimate to finished fence — here's the typical path for a residential project.
Instant Estimate · 2 minutes
Draw your fence on a map and see a price range right away — no site visit needed to start.
We call you · 1–3 days
Josh follows up on the estimate. FindMyFencer does the install with its own crews.
Site visit and measurement · Within a week
Our crew confirms the layout, arranges a utility locate (811), and goes over the price with you.
Scheduling & Materials · 1–3 weeks
Materials are ordered and the crew is scheduled. If your city requires a permit, this is when it's pulled.
Installation · 1–3 days
A typical 150-ft residential fence goes up in one to three days once the crew is on site.
Custom materials, permits, HOA approvals, and busy season (spring–summer) can stretch these windows — booking early in the year usually means faster installs.
Use our map tool to trace your fence line and get an instant estimate.
Josh follows up about the job. We do not send the request to another company.
FindMyFencer installs with its own crews in Southern California and the Denver / Front Range area.
We install it
FindMyFencer measures, prices, and installs the fence with its own crews in Southern California and the Denver / Front Range area.
Real pricing data
Estimates use New Mexico installation costs and the details you enter. The range is not a final price.
Nothing due to see the range
Drawing your fence and seeing the estimate does not charge you.
Josh follows up
We call you about the job. We do not send the request to another company.
Fence installation costs in Grants vary based on material, fence height, yard size, and terrain. Draw your fence on the map to see a range for your project. The range is not a final price until we review the job.
Wood, vinyl, and chain link are consistently the top choices for residential fencing in New Mexico. Vinyl and aluminum are popular for low maintenance, while wood offers the most natural look. Split-rail and farm rail are common in rural and semi-rural areas.
FindMyFencer measures, prices, and installs fences with its own crews in Southern California and the Denver / Front Range area. Draw your fence for an estimate and Josh will follow up. We do not send your request to another company.
Most municipalities in New Mexico require a permit for fences taller than 6 feet, or for any fence built in a front yard. Requirements vary by neighborhood and HOA rules. We recommend checking with Grants's building department — or Cibola County for unincorporated addresses — before starting.
Most residential fence projects in Grants take 1–3 days depending on the length, material, and ground conditions. Post curing for concrete-set posts adds 24–48 hours before the fence is fully load-bearing.
Grants is in Cibola County (county FIPS 35006). Your fence permit and inspection process runs through the city or Cibola County offices depending on your exact address.
Grants addresses in this guide use 2 ZIP codes: 87020, 87021, including nearby unincorporated Cibola County areas.
2026 Fencing Cost Guide
Planning your budget? Here is what you can expect to pay per linear foot for different fencing materials in 2026.
Vinyl vs Wood: The Ultimate Hammer Test
Trying to decide between the classic look of wood and the durability of vinyl? We break down the costs, maintenance, and longevity of both materials.
Do I Need a Permit? Fencing Laws Explained
Avoid fines and angry neighbors. Learn the basics of zoning laws, property lines, and HOA regulations before you dig.
How to Measure Your Yard for a Fence
Accurate measurements are the foundation of an accurate fence quote. Follow this step-by-step guide to measure your yard like a pro.
Draw your fence in 2 minutes and see a range. FindMyFencer installs with its own crews.
Start My Free Quote