Fence estimates in Price, UT
See a price range for a fence in Price. FindMyFencer installs with its own crews in Southern California and the Denver / Front Range area.
Get My Free EstimateFencing in Price, UT
As a close-knit community in Utah of roughly 8,378 residents, Price sees steady demand for residential fencing — from backyard privacy and pet enclosures to curb-appeal upgrades and pool-safety fences.
Local fences here have to stand up to high-altitude sun, heavy snow load, and hard freeze-thaw cycles. Steel-reinforced posts set below the frost line and low-maintenance vinyl or cedar hold up best here. Material and post depth depend on the yard. The range on this page is a starting point, not a locked price.
Typical installed cost per linear foot in Price, UT
$14 – $118 /ft
Installed price per linear foot across common fence materials — about 2% below the national average for Utah. Your total depends on fence length, material, and site conditions.
Local Information for Price, UT
Price is located in Carbon County, Utah. The map covers the 84501 ZIP code.
Building permits and fence regulations for Price addresses are typically handled by the city's building department, with unincorporated areas nearby falling under Carbon County jurisdiction. Check that office for the rules on your street.
County
Carbon County
Determines your permit office and local fence codes.
ZIP Codes Served
Price and nearby communities in Carbon County.
Average Fence Cost in Price, UT
Real installed-price ranges by material, adjusted for Utah labor and material costs. Typical project assumes 150 linear feet of fencing.
| Material | Installed Cost | Lifespan | Upkeep | Typical 150-ft Project |
|---|---|---|---|---|
Cedar / WoodMost Popular Classic privacy pick | $25 – $59 /ft | 15–20 yrs | Stain or seal every 2–3 yrs | ~$5,748 |
Vinyl Low maintenance, long lifespan | $34 – $69 /ft | 20–30 yrs | Occasional rinse — no painting | ~$6,703 |
Chain Link Budget-friendly & durable | $10 – $39 /ft | 20+ yrs | Virtually none | ~$3,469 |
Aluminum Elegant, pool-code friendly | $29 – $59 /ft | 30+ yrs | Virtually none — won't rust | ~$7,056 |
Project totals assume 150 linear feet installed.
Gates, terrain, old-fence removal, and height upgrades affect your final number — draw your fence on a map for a price in under 2 minutes.
See how Utah compares nationally in our Utah Fence Cost Report, part of the National Fence Cost Report.
Fence Types Available in Price
Draw your fence to see a price range in minutes. FindMyFencer installs with its own crews in Southern California and the Denver / Front Range area.
Fencing for Utah's Climate
Utah's cold, snowy winters, hard freeze-thaw cycles, and intense high-altitude sun call for posts set below the frost line and UV-stable materials like vinyl and cedar.
Set posts below the local frost line (often ~30 in.) to prevent heaving.
Permits & HOA Rules in Utah
Utah municipalities commonly require a permit for fences over 6 feet and cap front-yard height, with corner sight rules. Rules vary by city and county, so confirm height limits, setbacks, and whether a permit is required with your local building department before you start.
HOAs are common across Salt Lake City- and Utah County-area subdivisions, often regulating materials, colors, and heights.
How Long Does a Fence Install Take in Price?
From first estimate to finished fence — here's the typical path for a residential project.
- 1
Instant Estimate · 2 minutes
Draw your fence on a map and see a price range right away — no site visit needed to start.
- 2
We call you · 1–3 days
Josh follows up on the estimate. FindMyFencer does the install with its own crews.
- 3
Site visit and measurement · Within a week
Our crew confirms the layout, arranges a utility locate (811), and goes over the price with you.
- 4
Scheduling & Materials · 1–3 weeks
Materials are ordered and the crew is scheduled. If your city requires a permit, this is when it's pulled.
- 5
Installation · 1–3 days
A typical 150-ft residential fence goes up in one to three days once the crew is on site.
Custom materials, permits, HOA approvals, and busy season (spring–summer) can stretch these windows — booking early in the year usually means faster installs.
How It Works
1. Draw Your Fence
Use our map tool to trace your fence line and get an instant estimate.
2. We call you
Josh follows up about the job. We do not send the request to another company.
3. We install it
FindMyFencer installs with its own crews in Southern California and the Denver / Front Range area.
Why Homeowners in Price Choose FindMyFencer
We install it
FindMyFencer measures, prices, and installs the fence with its own crews in Southern California and the Denver / Front Range area.
Real pricing data
Estimates use Utah installation costs and the details you enter. The range is not a final price.
Nothing due to see the range
Drawing your fence and seeing the estimate does not charge you.
Josh follows up
We call you about the job. We do not send the request to another company.
Frequently Asked Questions — Price Fencing
How much does a fence cost in Price, UT?
Fence installation costs in Price vary based on material, fence height, yard size, and terrain. Draw your fence on the map to see a range for your project. The range is not a final price until we review the job.
What are the most popular fence types in Utah?
Wood, vinyl, and chain link are consistently the top choices for residential fencing in Utah. Vinyl and aluminum are popular for low maintenance, while wood offers the most natural look. Split-rail and farm rail are common in rural and semi-rural areas.
Who installs a fence in Price?
FindMyFencer measures, prices, and installs fences with its own crews in Southern California and the Denver / Front Range area. Draw your fence for an estimate and Josh will follow up. We do not send your request to another company.
Do I need a permit to build a fence in Price?
Most municipalities in Utah require a permit for fences taller than 6 feet, or for any fence built in a front yard. Requirements vary by neighborhood and HOA rules. We recommend checking with Price's building department — or Carbon County for unincorporated addresses — before starting.
How long does fence installation take in Price?
Most residential fence projects in Price take 1–3 days depending on the length, material, and ground conditions. Post curing for concrete-set posts adds 24–48 hours before the fence is fully load-bearing.
What county is Price, UT in?
Price is in Carbon County (county FIPS 49007). Your fence permit and inspection process runs through the city or Carbon County offices depending on your exact address.
Which ZIP codes does this Price page cover?
Price addresses in this guide use the 84501 ZIP code and the surrounding area.
Other Cities in Utah
Related Fence Guides
2026 Fencing Cost Guide
Planning your budget? Here is what you can expect to pay per linear foot for different fencing materials in 2026.
Vinyl vs Wood: The Ultimate Hammer Test
Trying to decide between the classic look of wood and the durability of vinyl? We break down the costs, maintenance, and longevity of both materials.
Do I Need a Permit? Fencing Laws Explained
Avoid fines and angry neighbors. Learn the basics of zoning laws, property lines, and HOA regulations before you dig.
How to Measure Your Yard for a Fence
Accurate measurements are the foundation of an accurate fence quote. Follow this step-by-step guide to measure your yard like a pro.
Ready to see a range for Price?
Draw your fence in 2 minutes and see a range. FindMyFencer installs with its own crews.
Start My Free Quote